|
|
|
 |
|
|
|
|
|
Hp laserjet 1010 Error
Print fast and efficiently with this high-capacity
ink, which dries in less than half a second on paper commonly used in the banking, retail, hospitality, and other transaction printing environments.
HP laser jet Printer 1010
|
 |
|
|
|
|
HP laserjet 1010 Clearing paper jams
HP laserjet 1010 Typical media jam locations
HP laserjet 1010 Removing a jammed page
Clearing paper jams
CAUTION: To prevent damage to the printer when clearing jams, including jams in the output bin, always open the print cartridge door and remove the print cartridge. Keep the door open and the cartridge out until the jam has been cleared. Opening the print cartridge door and removing the print cartridge relieves tension on the printer rollers, which prevents damage to the printer and makes the removal of jammed pages easier.
Occasionally, media becomes jammed during a print job. You are notified of a media jam by an error from the software and the printer control panel lights.
The following are some of the causes of media jams:
The input trays are loaded improperly or are too full.
NOTE: When you add new media, always remove all of the media from the input tray and straighten the stack of new media. This helps prevent multiple sheets of media from feeding through the printer at one time, reducing media jams.
The media does not meet HP specifications.
Typical media jam locations
Print cartridge area
Input tray areas : If the page is still sticking out of the input tray, gently try to remove it from the input tray without tearing the page.
Output path
NOTE: There might be loose toner in the printer after a media jam. This toner clears up after a few sheets are printed.
Removing a jammed page
CAUTION: Media jams might result in loose toner on the page. If you get any toner on your clothes, wash them in cold water. Hot water will permanently set the toner into the fabric .
CAUTION: To prevent damage to the printer when clearing jams, including jams in the output bin, always open the print cartridge door and remove the print cartridge.
Open the print cartridge door, and remove the print cartridge.
HP LaserJet 1010
CAUTION: To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the print cartridge with a sheet of paper.
With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the printer.
HP LaserJet 1010
When you have removed the jammed media, replace the print cartridge, and close the print cartridge door.
HP LaserJet 1010
After clearing a media jam, you might need to turn the printer off and turn it back on again.
NOTE: When you add new media, remove all of the media from the input tray and straighten the stack of new media.
|
|
|
|
|
|
|
|
Hp
laserjet 1010 Download
Hp laserjet 1010
Driver
Hp
laserjet 1010 Service Manual
|
|
|
